Cavalry Sword Hanger
Sword Hanger became a standard cavalry issue throughout the Civil and Indian Wars, up to 1900. Prior to the onset of the Civil War, J.E.B. Stuart did not like the design of the sword hangers used at that time so he designed and patented his own style of hanger. His device enabled the cavalryman to remove the sword, scabbard, and belt slings entirely without unhooking the scabbard from the belt and leaving the straps swinging loose from the belt rig.
The hanger is available in black or brown.
858
Enquiry about Cavalry Sword Hanger
Captcha
Related Products
-
Belt NCO & Officer
This NCO Belt is made from high quality American leather. This belt is made to fit any 2-Piece Buckle or Spoon & Wreath Buckle and NO STITCHING is required to affix the Buckle. Brass hook makes this belt adjustable for many sizes. The NCO Belt is also appropriate for officers where a full sword belt is not applicable. The belt is available in Black or Russet leather.
855
-
Cavalry Spur Strap
The cavalry spur strap measures 5/8″ x 18 3/4″. Sold individually. Available in black leather only.
878
-
Georgia Frame Buckle and Belt
Quality economical Brass Georgia Frame Buckle with black leather belt. The belt is 2 1/4 inches wide. This belt fits waist sizes up to 50 inches.
861
-
Cavalry Carbine Sling
The carbine was carried by the trooper suspended from the Carbine Sling worn across his body attached to the carbine by the snap swivel. This carbine sling is authentically reproduced and is correct for both Civil War and later period cavalry. It features a regulation buckle and brass end piece.
869
-
CIVIL WAR RIFLE US UNION MUSKET REGULATION CAP BELT POUCH-BROWN LEATHER
CIVIL WAR RIFLE US UNION REGULATION MUSKET CAP BELT POUCH-BROWN LEATHERReproduction percussion cap pouch. Shield shape.Made of black leather and lined with wool. Fits belts up to 2-3/4″ wide896
-
Belt & Snake Buckle
This quality economical 1 3/4 inch belt comes complete with a 2-piece snake cast brass buckle. A brass prong makes this belt adjustable up to a 50 inch waist. The belt is only available in black leather.
860
-
.69 Caliber Confederate Cartridge Box
888
-
Belt Roller Buckle Belt
This Roller Buckle Belt is made of quality leather with a Japanned black roller buckle. The belt is 1 7/8 inches wide. Available in black leather only.
859
-
CIVIL WAR US CSA PISTOL BOX
It is sewn with white linen thread, has the brass finial, and has two belt loops on the back.882
-
Civil War Cartridge Box with Tins Union and Confederate
This excellent quality reproduction Civil War Cartridge Box is made of durable black leather and is suitable for both Union and Confederate impressions. It features roller buckle attachments for the sling (sold separately) and comes with a set of two cartridge tins as well as an inner flap and tool pouch.
880
-
Cavalry Carbine Socket Tapered
This Carbine Socket is made of high quality leather and is tapered per the originals. The Carbine Socket was designed to hold the barrel of a trooper’s carbine snugly while riding on his mount. This pattern of Carbine socket continued in service after the Civil War and into the Indian Wars through the early 1880’s until replaced by the Carbine Boots. Available in Black leather. Russet leather is available by special order.
871
-
Belt Saber or Sword Belt
This Saber or Sword Belt is made from high quality American leather and comes with the over the shoulder Sam Browne strap and all hangers. Snap swivels are NOT included and are available at an EXTRA CHARGE. 2 snap swivels are required.
This belt is made to fit any 2-Piece Buckle or Spoon & Wreath Buckle and NO STITCHING is required to affix the Buckle. Brass hook makes this belt adjustable for many sizes. The belt is available in Black or Russet leather.
856
-
Cavalry Saddle Bags
These Civil War Saddle Bags are made of high quality American leather. Great attention to detail has been made to ensure the most accurate authentic reproduction. The saddle bag measures approximately 9 inches wide x 10 inches high x 3 3/4 inches deep. The overall length from end to end is approximately 36 inches. These high quality saddle bags are available in Black or Russet leather.
879
-
CIVIL WAR RIFLE US UNION MUSKET REGULATION CAP BELT POUCH-NATURAL LEATHER
CIVIL WAR RIFLE US UNION REGULATION MUSKET CAP BELT POUCH-NATURAL LEATHERReproduction percussion cap pouch. Shield shape.Made of black leather and lined with wool. Fits belts up to 2-3/4″ wide895
-
CIVIL WAR US UNION CS CONFEDERATE ENFIELD BOX
This Enfield cartridge box is made per British regulations in black leather with white linen thread. The tins are included. Per the original the box has cartridge box sling loops on the back.881
-
Pistol Holster Open Bottom
This economical and authentically made Pistol Holster fits most .36 – .44 caliber revolvers. The holster features full wrap around flap that is both stitched and riveted. The closed flap is secured with a brass finial. The belt loop is stitched and riveted. The holster has a OPEN bottom. Available in Black or Russet leather.
The holster is worn on the right side, with the gun butt forward: RIGHT Side, Butt Forward. Left handed models – LEFT Side, Butt Forward – are also available. Left side holsters were less common as they were not standard issue.
865
-
CIVIL WAR RIFLE US UNION MUSKET REGULATION CAP BELT POUCH-ROUGH SIDE LEATHER
Reproduction percussion cap pouch.Shield shape.Made of black leather and lined with wool. Fits belts up to 2-3/4″ wide894
-
Belt Enlisted M1855 & US Oval Belt Plate
M1855 US issue enlisted belt including cast brass (NOT lead filled) US oval belt plate. This belt fits waist sizes up to 50 inches. The belt is available in black leather only.
854
-
CIVIL WAR US UNION OFFICER M1851 LEATHER SWORD SABER BELT & BUCKLE — ++
This Saber or Sword Belt is made from high quality American leather and comes with the over the shoulder Sam Browne strap and all hangers.Black/Brown leather This belt is made with SOFT leather892
-
CIVIL WAR US UNION NCO FIELD BELT & BUCKLE
CIVIL WAR US UNION NCO FIELD BELT & BUCKLE-FITSSIZE:(34-60 WAIST)MADE FROM HIGH QUALITY BLACK LEATHER890
-
Infantry Cartridge Box with tins
890
-
Belt Enlisted M1855
M1855 US issue enlisted belt. This belt fits all the one piece buckles and belt plates. Select Black or Russet leather. Now available in white.
850
-
Georgia Frame Buckle and Belt
This Brass Georgia Frame Buckle is a close copy of an original. It measures approximately 2 1/4 inches wide.
Select Black or Russet leather belt.
862
-
CIVIL WAR US UNION OFFICER M1851 LEATHER SWORD SABER BELT & BUCKLE
This Saber or Sword Belt is made from high quality American leather and comes with the over the shoulder Sam Browne strap and all hangers.Black/Brown leather This belt is made with SOFT leather892
-
CIVIL WAR CS CONFEDERATE M1858 PISTOL LEATHER HOLSTER
NATURAL LEATHER “CS STAMPED” ***Left hand draw*** Can be worn on the Left hip or on Right hip for cross draw also called Right Side Grip/Butt ForwardFits belts up to 2-3/4″ wide885
-
Cavalry 1874 Dyer Cartridge Pouch
The M1874 Dyer cartridge pouch is used with the 45/70 rifle or carbine during the Indian Wars. It is made of high quality black leather with a US in oval embossed on the flap. The flap closure has a brass plate and finial. There are two belt loops on the back. It is lined with lambs wool. The pouch is available in black and Russet leather.
876
-
Indian War & 2-piece M1874 US Buckle
Quality economical Indian War 1 3/4 inch belt comes complete with a 2-piece US cast brass buckle. A brass hook makes this belt adjustable up to a 50 inch waist. The belt is only available in black leather.
863
-
Confederate Cartridge Box
887
