Civil War Cartridge Box with Tins Union and Confederate
This excellent quality reproduction Civil War Cartridge Box is made of durable black leather and is suitable for both Union and Confederate impressions. It features roller buckle attachments for the sling (sold separately) and comes with a set of two cartridge tins as well as an inner flap and tool pouch.
880
Enquiry about Civil War Cartridge Box with Tins Union and Confederate
Captcha
Related Products
-
Cavalry Saddle Bags
These Civil War Saddle Bags are made of high quality American leather. Great attention to detail has been made to ensure the most accurate authentic reproduction. The saddle bag measures approximately 9 inches wide x 10 inches high x 3 3/4 inches deep. The overall length from end to end is approximately 36 inches. These high quality saddle bags are available in Black or Russet leather.
879
-
CIVIL WAR US CSA PISTOL BOX
It is sewn with white linen thread, has the brass finial, and has two belt loops on the back.882
-
CIVIL WAR US CSA SPRINGFIELD MUSKET CARTRIDGE BOX BROWN
Leather Ammo Cartridge Box-holds a large amount of pre-made gun powder rounds for your musket rifle. This piece uses a sling that attaches to the Cartridge Box. (Sling Sold Separately) The Cartridge Box rests at your side. The cartridge box also has 2- loops on the back so it can be worn on a waist belt as well. The Cartridge Box has an inside leather lid and the outside cover secures closed with a strap with a slit in it that fits over a brass knob so you do not loose your gun powder rounds. There is also a pocket on the inside that holds your nipple pic, and “T” wrench.886
-
Confederate Cartridge Box
887
-
Cavalry Carbine Sling
Carbine Sling is authentically reproduced, carries an arsenal stamp, and is correct for both Civil War and later period cavalry. It features a regulation buckle and brass end piece. Available in Black Leather.
870
-
CIVIL WAR US UNION CS CONFEDERATE ENFIELD BOX
This Enfield cartridge box is made per British regulations in black leather with white linen thread. The tins are included. Per the original the box has cartridge box sling loops on the back.881
-
Pistol Holster Open Bottom
This economical and authentically made Pistol Holster fits most .36 – .44 caliber revolvers. The holster features full wrap around flap that is both stitched and riveted. The closed flap is secured with a brass finial. The belt loop is stitched and riveted. The holster has a OPEN bottom. Available in Black or Russet leather.
The holster is worn on the right side, with the gun butt forward: RIGHT Side, Butt Forward. Left handed models – LEFT Side, Butt Forward – are also available. Left side holsters were less common as they were not standard issue.
865
-
US Indian War Pistol Cartridge Pouch
This is the Indian Wars pistol cartridge pouch for the M1873. Nearly identical to the American Civil War Cap Box, except with US in oval embossed on the flap. This economical cap box features an interior lining, brass finial, 2 belt loops on the back and is sewn in white thread.
875
-
Pattern 1861 Cartridge Box C.S. Storms .58
889
-
CIVIL WAR US UNION OFFICER M1851 LEATHER SWORD SABER BELT & BUCKLE
This Saber or Sword Belt is made from high quality American leather and comes with the over the shoulder Sam Browne strap and all hangers.Black/Brown leather This belt is made with SOFT leather892
-
CIVIL WAR US CSA SPRINGFIELD MUSKET CARTRIDGE BOX
Black Leather Ammo Cartridge Box-holds a large amount of pre-made gun powder rounds for your musket rifle. This piece uses a sling that attaches to the Cartridge Box. (Sling Sold Separately)884
-
Cavalry Carbine Socket Tapered
This Carbine Socket is made of high quality leather and is tapered per the originals. The Carbine Socket was designed to hold the barrel of a trooper’s carbine snugly while riding on his mount. This pattern of Carbine socket continued in service after the Civil War and into the Indian Wars through the early 1880’s until replaced by the Carbine Boots. Available in Black leather. Russet leather is available by special order.
871
-
CIVIL WAR RIFLE US UNION MUSKET REGULATION CAP BELT POUCH-NATURAL LEATHER
CIVIL WAR RIFLE US UNION REGULATION MUSKET CAP BELT POUCH-NATURAL LEATHERReproduction percussion cap pouch. Shield shape.Made of black leather and lined with wool. Fits belts up to 2-3/4″ wide895
-
CIVIL WAR US UNION NCO FIELD BELT & BUCKLE
CIVIL WAR US UNION NCO FIELD BELT & BUCKLE-FITSSIZE:(34-60 WAIST)MADE FROM HIGH QUALITY BLACK LEATHER890
-
Cavalry Carbine Sling
The carbine was carried by the trooper suspended from the Carbine Sling worn across his body attached to the carbine by the snap swivel. This carbine sling is authentically reproduced and is correct for both Civil War and later period cavalry. It features a regulation buckle and brass end piece.
869
-
Pistol Holster Indian War
The Indian War “Cavalry” Pistol Holster has a smaller flap than the Civil War model. This Pistol Holster is made of high quality leather embossed with “US” on the holster body. The holster is sewn with white linen thread. The closed flap is secured with a brass finial. The belt loop is stitched and riveted. The holster has a closed bottom. Available in black leather only.
867
-
Cavalry Spencer Quick Loader Box
The Civil War Blakeslee Spencer Quick Loader Cartridge Box is designed for the Spencer Carbine. Because of the rapid speed that a Spencer carbine could be fired, a special box needed to be designed to hold cartridges for loading.
874
-
CIVIL WAR RIFLE US UNION MUSKET REGULATION CAP BELT POUCH-ROUGH SIDE LEATHER
Reproduction percussion cap pouch.Shield shape.Made of black leather and lined with wool. Fits belts up to 2-3/4″ wide894
-
Belt & Snake Buckle
This quality economical 1 3/4 inch belt comes complete with a 2-piece snake cast brass buckle. A brass prong makes this belt adjustable up to a 50 inch waist. The belt is only available in black leather.
860
-
Belt Saber or Sword Belt Hanger
This hanger is typically for NCO & Officer Belts, but can be used on enlisted and even modern day belts. This hanger is designed to slide over the existing belt. The hanger is available in black only.
Snap Swivels are available at an extra charge. 2 snap swivels are needed.
857
-
CIVIL WAR US CSA PISTOL BOX
It is sewn with white linen thread, has the brass finial, and has two belt loops on the back.883
-
Belt Enlisted M1855
M1855 US issue enlisted belt. This belt fits all the one piece buckles and belt plates. Select Black or Russet leather. Now available in white.
850
-
Cavalry M1885 Carbine Boot
The Carbine Boot was designed to hold the barrel of a trooper’s carbine snugly while riding on his mount.
This first pattern M1885 carbine boot is made of High Quality leather. Available in Black leather only.
872
-
Belt NCO & Officer
This NCO Belt is made from high quality American leather. This belt is made to fit any 2-Piece Buckle or Spoon & Wreath Buckle and NO STITCHING is required to affix the Buckle. Brass hook makes this belt adjustable for many sizes. The NCO Belt is also appropriate for officers where a full sword belt is not applicable. The belt is available in Black or Russet leather.
855
-
Belt Enlisted M1855 & CS Oval Belt Plate
M1855 US issue enlisted belt including cast brass (NOT lead filled) CS oval belt plate. This belt fits waist sizes up to 50 inches. The belt is available in black leather only.
853
-
Pistol Holster Indian War
The Indian War “Cavalry” Pistol Holster has a smaller flap than the Civil War model. This economical Pistol Holster is made of quality leather embossed with “US” on the holster body. The holster is sewn with white linen thread. The closed flap is secured with a brass finial. The belt loop is stitched and riveted. The holster has a closed bottom. Available in black leather only.
868
-
CIVIL WAR RIFLE US UNION MUSKET REGULATION CAP BELT POUCH-BROWN LEATHER
CIVIL WAR RIFLE US UNION REGULATION MUSKET CAP BELT POUCH-BROWN LEATHERReproduction percussion cap pouch. Shield shape.Made of black leather and lined with wool. Fits belts up to 2-3/4″ wide896
-
Georgia Frame Buckle and Belt
This Brass Georgia Frame Buckle is a close copy of an original. It measures approximately 2 1/4 inches wide.
Select Black or Russet leather belt.
862
