CIVIL WAR US UNION NCO FIELD BELT & BUCKLE
890
Enquiry about CIVIL WAR US UNION NCO FIELD BELT & BUCKLE
Captcha
Related Products
-
Belt Saber or Sword Belt Hanger
This hanger is typically for NCO & Officer Belts, but can be used on enlisted and even modern day belts. This hanger is designed to slide over the existing belt. The hanger is available in black only.
Snap Swivels are available at an extra charge. 2 snap swivels are needed.
857
-
Cavalry Saber Knot
Black leather strap with a braided leather tassel. One end fastens to the grip of the saber and the tasseled end slips over the wrist to prevent dropping the saber during combat. It measures 22 inches including the tassel.
864
-
Cavalry Carbine Sling
The carbine was carried by the trooper suspended from the Carbine Sling worn across his body attached to the carbine by the snap swivel. This carbine sling is authentically reproduced and is correct for both Civil War and later period cavalry. It features a regulation buckle and brass end piece.
869
-
Belt & Snake Buckle
This quality economical 1 3/4 inch belt comes complete with a 2-piece snake cast brass buckle. A brass prong makes this belt adjustable up to a 50 inch waist. The belt is only available in black leather.
860
-
Belt Saber or Sword Belt
This Saber or Sword Belt is made from high quality American leather and comes with the over the shoulder Sam Browne strap and all hangers. Snap swivels are NOT included and are available at an EXTRA CHARGE. 2 snap swivels are required.
This belt is made to fit any 2-Piece Buckle or Spoon & Wreath Buckle and NO STITCHING is required to affix the Buckle. Brass hook makes this belt adjustable for many sizes. The belt is available in Black or Russet leather.
856
-
Belt NCO & Officer
This NCO Belt is made from high quality American leather. This belt is made to fit any 2-Piece Buckle or Spoon & Wreath Buckle and NO STITCHING is required to affix the Buckle. Brass hook makes this belt adjustable for many sizes. The NCO Belt is also appropriate for officers where a full sword belt is not applicable. The belt is available in Black or Russet leather.
855
-
CIVIL WAR US CSA SPRINGFIELD MUSKET CARTRIDGE BOX
Black Leather Ammo Cartridge Box-holds a large amount of pre-made gun powder rounds for your musket rifle. This piece uses a sling that attaches to the Cartridge Box. (Sling Sold Separately)884
-
Cavalry 1876 McKeever Box
The M1876 McKeever Box is used with the 45/70 rifle or carbine during the Indian Wars. It is made of high quality black leather with a US in oval embossed on the flap. The flap closure has a brass finial. There are two belt loops on the back. Inside are 2 rows of ten canvas loops for 20 cartridges. The box opens by folding down on a brass hinge. The box is available in Black or Russet leather.
877
-
CIVIL WAR RIFLE US UNION MUSKET REGULATION CAP BELT POUCH-BROWN LEATHER
CIVIL WAR RIFLE US UNION REGULATION MUSKET CAP BELT POUCH-BROWN LEATHERReproduction percussion cap pouch. Shield shape.Made of black leather and lined with wool. Fits belts up to 2-3/4″ wide896
-
CIVIL WAR CS CONFEDERATE M1858 PISTOL LEATHER HOLSTER
NATURAL LEATHER “CS STAMPED” ***Left hand draw*** Can be worn on the Left hip or on Right hip for cross draw also called Right Side Grip/Butt ForwardFits belts up to 2-3/4″ wide885
-
Georgia Frame Buckle and Belt
Quality economical Brass Georgia Frame Buckle with black leather belt. The belt is 2 1/4 inches wide. This belt fits waist sizes up to 50 inches.
861
-
Cavalry Saddle Bags
These Civil War Saddle Bags are made of high quality American leather. Great attention to detail has been made to ensure the most accurate authentic reproduction. The saddle bag measures approximately 9 inches wide x 10 inches high x 3 3/4 inches deep. The overall length from end to end is approximately 36 inches. These high quality saddle bags are available in Black or Russet leather.
879
-
CIVIL WAR US CSA PISTOL BOX
It is sewn with white linen thread, has the brass finial, and has two belt loops on the back.883
-
Cavalry M1885 Carbine Boot
The Carbine Boot was designed to hold the barrel of a trooper’s carbine snugly while riding on his mount.
This first pattern M1885 carbine boot is made of High Quality leather. Available in Black leather only.
872
-
Cavalry Spencer Quick Loader Box
The Civil War Blakeslee Spencer Quick Loader Cartridge Box is designed for the Spencer Carbine. Because of the rapid speed that a Spencer carbine could be fired, a special box needed to be designed to hold cartridges for loading.
874
-
Belt Enlisted M1855 & US Oval Belt Plate
M1855 US issue enlisted belt including cast brass (NOT lead filled) US oval belt plate. This belt fits waist sizes up to 50 inches. The belt is available in black leather only.
854
-
Belt Roller Buckle Belt
This Roller Buckle Belt is made of quality leather with a Japanned black roller buckle. The belt is 1 7/8 inches wide. Available in black leather only.
859
-
CIVIL WAR US CSA SPRINGFIELD MUSKET CARTRIDGE BOX BROWN
Leather Ammo Cartridge Box-holds a large amount of pre-made gun powder rounds for your musket rifle. This piece uses a sling that attaches to the Cartridge Box. (Sling Sold Separately) The Cartridge Box rests at your side. The cartridge box also has 2- loops on the back so it can be worn on a waist belt as well. The Cartridge Box has an inside leather lid and the outside cover secures closed with a strap with a slit in it that fits over a brass knob so you do not loose your gun powder rounds. There is also a pocket on the inside that holds your nipple pic, and “T” wrench.886
-
Pattern 1861 Cartridge Box C.S. Storms .58
889
-
Cavalry Sword Hanger
Sword Hanger became a standard cavalry issue throughout the Civil and Indian Wars, up to 1900. Prior to the onset of the Civil War, J.E.B. Stuart did not like the design of the sword hangers used at that time so he designed and patented his own style of hanger. His device enabled the cavalryman to remove the sword, scabbard, and belt slings entirely without unhooking the scabbard from the belt and leaving the straps swinging loose from the belt rig.
The hanger is available in black or brown.
858
-
Pistol Holster Closed Bottom
This economical and authentically made Pistol Holster fits most .36 – .44 caliber revolvers. The holster features full wrap around flap that is both stitched and riveted. The closed flap is secured with a brass finial. The belt loop is stitched and riveted. The holster has a CLOSED bottom. Available in Black or Russet leather.
The holster is worn on the right side, with the gun butt forward: RIGHT Side, Butt Forward. Left handed models – LEFT Side, Butt Forward – are also available. Left side holsters were less common as they were not standard issue.
866
-
Civil War Cartridge Box with Tins Union and Confederate
This excellent quality reproduction Civil War Cartridge Box is made of durable black leather and is suitable for both Union and Confederate impressions. It features roller buckle attachments for the sling (sold separately) and comes with a set of two cartridge tins as well as an inner flap and tool pouch.
880
-
CIVIL WAR RIFLE US UNION MUSKET REGULATION CAP BELT POUCH-BLACK LEATHER
New reproduction percussion cap pouch.Shield shape. Made of black leather and lined with wool. Fits belts up to 2-3/4″ wide893
-
Infantry Cartridge Box with tins
890
-
Cavalry Pommel Holster
The Pommel Holster is made of high quality American Leather. It fits .36 or .44 Caliber Revolvers. Available in black leather. Russet leather is available as a special order.
867
-
Cavalry Spur Strap
The cavalry spur strap measures 5/8″ x 18 3/4″. Sold individually. Available in black leather only.
878
-
.69 Caliber Confederate Cartridge Box
888
-
CIVIL WAR RIFLE US UNION MUSKET REGULATION CAP BELT POUCH-NATURAL LEATHER
CIVIL WAR RIFLE US UNION REGULATION MUSKET CAP BELT POUCH-NATURAL LEATHERReproduction percussion cap pouch. Shield shape.Made of black leather and lined with wool. Fits belts up to 2-3/4″ wide895
