CIVIL WAR CS CONFEDERATE M1858 PISTOL LEATHER HOLSTER
885
Enquiry about CIVIL WAR CS CONFEDERATE M1858 PISTOL LEATHER HOLSTER
Captcha
Related Products
-
Belt Saber or Sword Belt
This Saber or Sword Belt is made from high quality American leather and comes with the over the shoulder Sam Browne strap and all hangers. Snap swivels are NOT included and are available at an EXTRA CHARGE. 2 snap swivels are required.
This belt is made to fit any 2-Piece Buckle or Spoon & Wreath Buckle and NO STITCHING is required to affix the Buckle. Brass hook makes this belt adjustable for many sizes. The belt is available in Black or Russet leather.
856
-
Cavalry Spur Strap
The cavalry spur strap measures 5/8″ x 18 3/4″. Sold individually. Available in black leather only.
878
-
Cavalry Saber Knot
Black leather strap with a braided leather tassel. One end fastens to the grip of the saber and the tasseled end slips over the wrist to prevent dropping the saber during combat. It measures 22 inches including the tassel.
864
-
Belt Saber or Sword Belt Hanger
This hanger is typically for NCO & Officer Belts, but can be used on enlisted and even modern day belts. This hanger is designed to slide over the existing belt. The hanger is available in black only.
Snap Swivels are available at an extra charge. 2 snap swivels are needed.
857
-
Cavalry Carbine Sling
Carbine Sling is authentically reproduced, carries an arsenal stamp, and is correct for both Civil War and later period cavalry. It features a regulation buckle and brass end piece. Available in Black Leather.
870
-
CIVIL WAR US UNION CS CONFEDERATE ENFIELD BOX
This Enfield cartridge box is made per British regulations in black leather with white linen thread. The tins are included. Per the original the box has cartridge box sling loops on the back.881
-
Georgia Frame Buckle and Belt
This Brass Georgia Frame Buckle is a close copy of an original. It measures approximately 2 1/4 inches wide.
Select Black or Russet leather belt.
862
-
Cavalry 1876 McKeever Box
The M1876 McKeever Box is used with the 45/70 rifle or carbine during the Indian Wars. It is made of high quality black leather with a US in oval embossed on the flap. The flap closure has a brass finial. There are two belt loops on the back. Inside are 2 rows of ten canvas loops for 20 cartridges. The box opens by folding down on a brass hinge. The box is available in Black or Russet leather.
877
-
Cavalry Sword Hanger
Sword Hanger became a standard cavalry issue throughout the Civil and Indian Wars, up to 1900. Prior to the onset of the Civil War, J.E.B. Stuart did not like the design of the sword hangers used at that time so he designed and patented his own style of hanger. His device enabled the cavalryman to remove the sword, scabbard, and belt slings entirely without unhooking the scabbard from the belt and leaving the straps swinging loose from the belt rig.
The hanger is available in black or brown.
858
-
Infantry Cartridge Box with tins
890
-
CIVIL WAR RIFLE US UNION MUSKET REGULATION CAP BELT POUCH-BROWN LEATHER
CIVIL WAR RIFLE US UNION REGULATION MUSKET CAP BELT POUCH-BROWN LEATHERReproduction percussion cap pouch. Shield shape.Made of black leather and lined with wool. Fits belts up to 2-3/4″ wide896
-
Belt Enlisted M1855
M1855 US issue enlisted belt. This belt fits all the one piece buckles and belt plates. Select Black or Russet leather. Now available in white.
850
-
Cavalry Carbine Cartridge Box
An economical cavalry carbine cartridge box features an inner flap covering a tool pouch. Wooden blocks for cartridges are included. The tab on the front flap is both sewn and riveted. There are 2 belt loops on the back. The box is sewn in white thread and is made of black leather and now in Russet.
Options: Black or Russet.
873
-
CIVIL WAR RIFLE US UNION MUSKET REGULATION CAP BELT POUCH-NATURAL LEATHER
CIVIL WAR RIFLE US UNION REGULATION MUSKET CAP BELT POUCH-NATURAL LEATHERReproduction percussion cap pouch. Shield shape.Made of black leather and lined with wool. Fits belts up to 2-3/4″ wide895
-
CIVIL WAR US UNION OFFICER M1851 LEATHER SWORD SABER BELT & BUCKLE — ++
This Saber or Sword Belt is made from high quality American leather and comes with the over the shoulder Sam Browne strap and all hangers.Black/Brown leather This belt is made with SOFT leather892
-
CIVIL WAR US CSA SPRINGFIELD MUSKET CARTRIDGE BOX BROWN
Leather Ammo Cartridge Box-holds a large amount of pre-made gun powder rounds for your musket rifle. This piece uses a sling that attaches to the Cartridge Box. (Sling Sold Separately) The Cartridge Box rests at your side. The cartridge box also has 2- loops on the back so it can be worn on a waist belt as well. The Cartridge Box has an inside leather lid and the outside cover secures closed with a strap with a slit in it that fits over a brass knob so you do not loose your gun powder rounds. There is also a pocket on the inside that holds your nipple pic, and “T” wrench.886
-
Cavalry Pommel Holster
The Pommel Holster is made of high quality American Leather. It fits .36 or .44 Caliber Revolvers. Available in black leather. Russet leather is available as a special order.
867
-
CIVIL WAR RIFLE US UNION MUSKET REGULATION CAP BELT POUCH-BLACK LEATHER
New reproduction percussion cap pouch.Shield shape. Made of black leather and lined with wool. Fits belts up to 2-3/4″ wide893
-
Belt Enlisted M1855 & CS Oval Belt Plate
M1855 US issue enlisted belt including cast brass (NOT lead filled) CS oval belt plate. This belt fits waist sizes up to 50 inches. The belt is available in black leather only.
853
-
Pattern 1861 Cartridge Box C.S. Storms .58
889
-
Civil War Cartridge Box with Tins Union and Confederate
This excellent quality reproduction Civil War Cartridge Box is made of durable black leather and is suitable for both Union and Confederate impressions. It features roller buckle attachments for the sling (sold separately) and comes with a set of two cartridge tins as well as an inner flap and tool pouch.
880
-
Belt NCO & Officer
This NCO Belt is made from high quality American leather. This belt is made to fit any 2-Piece Buckle or Spoon & Wreath Buckle and NO STITCHING is required to affix the Buckle. Brass hook makes this belt adjustable for many sizes. The NCO Belt is also appropriate for officers where a full sword belt is not applicable. The belt is available in Black or Russet leather.
855
-
Pistol Holster Open Bottom
This economical and authentically made Pistol Holster fits most .36 – .44 caliber revolvers. The holster features full wrap around flap that is both stitched and riveted. The closed flap is secured with a brass finial. The belt loop is stitched and riveted. The holster has a OPEN bottom. Available in Black or Russet leather.
The holster is worn on the right side, with the gun butt forward: RIGHT Side, Butt Forward. Left handed models – LEFT Side, Butt Forward – are also available. Left side holsters were less common as they were not standard issue.
865
-
CIVIL WAR US CSA PISTOL BOX
It is sewn with white linen thread, has the brass finial, and has two belt loops on the back.883
-
CIVIL WAR US UNION OFFICER M1851 LEATHER SWORD SABER BELT & BUCKLE
This Saber or Sword Belt is made from high quality American leather and comes with the over the shoulder Sam Browne strap and all hangers.Black/Brown leather This belt is made with SOFT leather892
-
Belt Enlisted M1855 & US Oval Belt Plate
M1855 US issue enlisted belt including cast brass (NOT lead filled) US oval belt plate. This belt fits waist sizes up to 50 inches. The belt is available in black leather only.
854
-
Belt Roller Buckle Belt
This Roller Buckle Belt is made of quality leather with a Japanned black roller buckle. The belt is 1 7/8 inches wide. Available in black leather only.
859
-
Confederate Cartridge Box
887
