Belt & Snake Buckle
This quality economical 1 3/4 inch belt comes complete with a 2-piece snake cast brass buckle. A brass prong makes this belt adjustable up to a 50 inch waist. The belt is only available in black leather.
860
Enquiry about Belt & Snake Buckle
Captcha
Related Products
-
Cavalry 1874 Dyer Cartridge Pouch
The M1874 Dyer cartridge pouch is used with the 45/70 rifle or carbine during the Indian Wars. It is made of high quality black leather with a US in oval embossed on the flap. The flap closure has a brass plate and finial. There are two belt loops on the back. It is lined with lambs wool. The pouch is available in black and Russet leather.
876
-
Pistol Holster Closed Bottom
This economical and authentically made Pistol Holster fits most .36 – .44 caliber revolvers. The holster features full wrap around flap that is both stitched and riveted. The closed flap is secured with a brass finial. The belt loop is stitched and riveted. The holster has a CLOSED bottom. Available in Black or Russet leather.
The holster is worn on the right side, with the gun butt forward: RIGHT Side, Butt Forward. Left handed models – LEFT Side, Butt Forward – are also available. Left side holsters were less common as they were not standard issue.
866
-
Belt Roller Buckle Belt
This Roller Buckle Belt is made of quality leather with a Japanned black roller buckle. The belt is 1 7/8 inches wide. Available in black leather only.
859
-
Belt Enlisted M1855
M1855 US issue enlisted belt. This belt fits all the one piece buckles and belt plates. Select Black or Russet leather. Now available in white.
850
-
CIVIL WAR US UNION OFFICER M1851 LEATHER SWORD SABER BELT & BUCKLE
This Saber or Sword Belt is made from high quality American leather and comes with the over the shoulder Sam Browne strap and all hangers.Black/Brown leather This belt is made with SOFT leather892
-
CIVIL WAR US CSA SPRINGFIELD MUSKET CARTRIDGE BOX
Black Leather Ammo Cartridge Box-holds a large amount of pre-made gun powder rounds for your musket rifle. This piece uses a sling that attaches to the Cartridge Box. (Sling Sold Separately)884
-
.69 Caliber Confederate Cartridge Box
888
-
Cavalry Pommel Holster
The Pommel Holster is made of high quality American Leather. It fits .36 or .44 Caliber Revolvers. Available in black leather. Russet leather is available as a special order.
867
-
Pistol Holster Indian War
The Indian War “Cavalry” Pistol Holster has a smaller flap than the Civil War model. This Pistol Holster is made of high quality leather embossed with “US” on the holster body. The holster is sewn with white linen thread. The closed flap is secured with a brass finial. The belt loop is stitched and riveted. The holster has a closed bottom. Available in black leather only.
867
-
CIVIL WAR US CSA PISTOL BOX
It is sewn with white linen thread, has the brass finial, and has two belt loops on the back.883
-
Cavalry Carbine Cartridge Box
An economical cavalry carbine cartridge box features an inner flap covering a tool pouch. Wooden blocks for cartridges are included. The tab on the front flap is both sewn and riveted. There are 2 belt loops on the back. The box is sewn in white thread and is made of black leather and now in Russet.
Options: Black or Russet.
873
-
Cavalry Spur Strap
The cavalry spur strap measures 5/8″ x 18 3/4″. Sold individually. Available in black leather only.
878
-
US Indian War Pistol Cartridge Pouch
This is the Indian Wars pistol cartridge pouch for the M1873. Nearly identical to the American Civil War Cap Box, except with US in oval embossed on the flap. This economical cap box features an interior lining, brass finial, 2 belt loops on the back and is sewn in white thread.
875
-
Belt Saber or Sword Belt
This Saber or Sword Belt is made from high quality American leather and comes with the over the shoulder Sam Browne strap and all hangers. Snap swivels are NOT included and are available at an EXTRA CHARGE. 2 snap swivels are required.
This belt is made to fit any 2-Piece Buckle or Spoon & Wreath Buckle and NO STITCHING is required to affix the Buckle. Brass hook makes this belt adjustable for many sizes. The belt is available in Black or Russet leather.
856
-
CIVIL WAR US UNION NCO FIELD BELT & BUCKLE
CIVIL WAR US UNION NCO FIELD BELT & BUCKLE-FITSSIZE:(34-60 WAIST)MADE FROM HIGH QUALITY BLACK LEATHER890
-
Belt Enlisted M1855 with Keeper
M1855 US issue belt with Brass Keeper installed. The brass keepers were commonly utilized on mid to late war M1855 Enlisted waist belts for Federals. They began to appear by early 1863 to replace the leather loop keeper that had been the standard prior to the war. The keeper has prongs to fasten to the leather waist belt. This belt fits all the one piece buckles and belt plates. Select Black or Russet leather color.
851
-
Pattern 1861 Cartridge Box C.S. Storms .58
889
-
Cavalry Sword Hanger
Sword Hanger became a standard cavalry issue throughout the Civil and Indian Wars, up to 1900. Prior to the onset of the Civil War, J.E.B. Stuart did not like the design of the sword hangers used at that time so he designed and patented his own style of hanger. His device enabled the cavalryman to remove the sword, scabbard, and belt slings entirely without unhooking the scabbard from the belt and leaving the straps swinging loose from the belt rig.
The hanger is available in black or brown.
858
-
Cavalry Carbine Socket Tapered
This Carbine Socket is made of high quality leather and is tapered per the originals. The Carbine Socket was designed to hold the barrel of a trooper’s carbine snugly while riding on his mount. This pattern of Carbine socket continued in service after the Civil War and into the Indian Wars through the early 1880’s until replaced by the Carbine Boots. Available in Black leather. Russet leather is available by special order.
871
-
Belt Saber or Sword Belt Hanger
This hanger is typically for NCO & Officer Belts, but can be used on enlisted and even modern day belts. This hanger is designed to slide over the existing belt. The hanger is available in black only.
Snap Swivels are available at an extra charge. 2 snap swivels are needed.
857
-
Pistol Holster Open Bottom
This economical and authentically made Pistol Holster fits most .36 – .44 caliber revolvers. The holster features full wrap around flap that is both stitched and riveted. The closed flap is secured with a brass finial. The belt loop is stitched and riveted. The holster has a OPEN bottom. Available in Black or Russet leather.
The holster is worn on the right side, with the gun butt forward: RIGHT Side, Butt Forward. Left handed models – LEFT Side, Butt Forward – are also available. Left side holsters were less common as they were not standard issue.
865
-
Belt Enlisted M1855 & US Oval Belt Plate
M1855 US issue enlisted belt including cast brass (NOT lead filled) US oval belt plate. This belt fits waist sizes up to 50 inches. The belt is available in black leather only.
854
-
Confederate Cartridge Box
887
-
Belt NCO & Officer
This NCO Belt is made from high quality American leather. This belt is made to fit any 2-Piece Buckle or Spoon & Wreath Buckle and NO STITCHING is required to affix the Buckle. Brass hook makes this belt adjustable for many sizes. The NCO Belt is also appropriate for officers where a full sword belt is not applicable. The belt is available in Black or Russet leather.
855
-
CIVIL WAR CS CONFEDERATE M1858 PISTOL LEATHER HOLSTER
NATURAL LEATHER “CS STAMPED” ***Left hand draw*** Can be worn on the Left hip or on Right hip for cross draw also called Right Side Grip/Butt ForwardFits belts up to 2-3/4″ wide885
-
CIVIL WAR RIFLE US UNION MUSKET REGULATION CAP BELT POUCH-NATURAL LEATHER
CIVIL WAR RIFLE US UNION REGULATION MUSKET CAP BELT POUCH-NATURAL LEATHERReproduction percussion cap pouch. Shield shape.Made of black leather and lined with wool. Fits belts up to 2-3/4″ wide895
-
Infantry Cartridge Box with tins
890
-
Cavalry Spencer Quick Loader Box
The Civil War Blakeslee Spencer Quick Loader Cartridge Box is designed for the Spencer Carbine. Because of the rapid speed that a Spencer carbine could be fired, a special box needed to be designed to hold cartridges for loading.
874
