Cap Box
892
Enquiry about Cap Box
Captcha
Related Products
-
CIVIL WAR RIFLE US UNION MUSKET REGULATION CAP BELT POUCH-BROWN LEATHER
CIVIL WAR RIFLE US UNION REGULATION MUSKET CAP BELT POUCH-BROWN LEATHERReproduction percussion cap pouch. Shield shape.Made of black leather and lined with wool. Fits belts up to 2-3/4″ wide896
-
Georgia Frame Buckle and Belt
Quality economical Brass Georgia Frame Buckle with black leather belt. The belt is 2 1/4 inches wide. This belt fits waist sizes up to 50 inches.
861
-
Belt Saber or Sword Belt Hanger
This hanger is typically for NCO & Officer Belts, but can be used on enlisted and even modern day belts. This hanger is designed to slide over the existing belt. The hanger is available in black only.
Snap Swivels are available at an extra charge. 2 snap swivels are needed.
857
-
CIVIL WAR CS CONFEDERATE M1858 PISTOL LEATHER HOLSTER
NATURAL LEATHER “CS STAMPED” ***Left hand draw*** Can be worn on the Left hip or on Right hip for cross draw also called Right Side Grip/Butt ForwardFits belts up to 2-3/4″ wide885
-
Pattern 1861 Cartridge Box C.S. Storms .58
889
-
Cavalry Carbine Sling
The carbine was carried by the trooper suspended from the Carbine Sling worn across his body attached to the carbine by the snap swivel. This carbine sling is authentically reproduced and is correct for both Civil War and later period cavalry. It features a regulation buckle and brass end piece.
869
-
Cavalry Pommel Holster
The Pommel Holster is made of high quality American Leather. It fits .36 or .44 Caliber Revolvers. Available in black leather. Russet leather is available as a special order.
867
-
Belt NCO & Officer
This NCO Belt is made from high quality American leather. This belt is made to fit any 2-Piece Buckle or Spoon & Wreath Buckle and NO STITCHING is required to affix the Buckle. Brass hook makes this belt adjustable for many sizes. The NCO Belt is also appropriate for officers where a full sword belt is not applicable. The belt is available in Black or Russet leather.
855
-
Confederate Cartridge Box
887
-
Cavalry Carbine Socket Tapered
This Carbine Socket is made of high quality leather and is tapered per the originals. The Carbine Socket was designed to hold the barrel of a trooper’s carbine snugly while riding on his mount. This pattern of Carbine socket continued in service after the Civil War and into the Indian Wars through the early 1880’s until replaced by the Carbine Boots. Available in Black leather. Russet leather is available by special order.
871
-
Cavalry M1885 Carbine Boot
The Carbine Boot was designed to hold the barrel of a trooper’s carbine snugly while riding on his mount.
This first pattern M1885 carbine boot is made of High Quality leather. Available in Black leather only.
872
-
Cavalry Carbine Sling
Carbine Sling is authentically reproduced, carries an arsenal stamp, and is correct for both Civil War and later period cavalry. It features a regulation buckle and brass end piece. Available in Black Leather.
870
-
CIVIL WAR US CSA SPRINGFIELD MUSKET CARTRIDGE BOX
Black Leather Ammo Cartridge Box-holds a large amount of pre-made gun powder rounds for your musket rifle. This piece uses a sling that attaches to the Cartridge Box. (Sling Sold Separately)884
-
CIVIL WAR US UNION CS CONFEDERATE ENFIELD BOX
This Enfield cartridge box is made per British regulations in black leather with white linen thread. The tins are included. Per the original the box has cartridge box sling loops on the back.881
-
Cavalry Spur Strap
The cavalry spur strap measures 5/8″ x 18 3/4″. Sold individually. Available in black leather only.
878
-
CIVIL WAR RIFLE US UNION MUSKET REGULATION CAP BELT POUCH-ROUGH SIDE LEATHER
Reproduction percussion cap pouch.Shield shape.Made of black leather and lined with wool. Fits belts up to 2-3/4″ wide894
-
CIVIL WAR RIFLE US UNION MUSKET REGULATION CAP BELT POUCH-BLACK LEATHER
New reproduction percussion cap pouch.Shield shape. Made of black leather and lined with wool. Fits belts up to 2-3/4″ wide893
-
Cavalry Sword Hanger
Sword Hanger became a standard cavalry issue throughout the Civil and Indian Wars, up to 1900. Prior to the onset of the Civil War, J.E.B. Stuart did not like the design of the sword hangers used at that time so he designed and patented his own style of hanger. His device enabled the cavalryman to remove the sword, scabbard, and belt slings entirely without unhooking the scabbard from the belt and leaving the straps swinging loose from the belt rig.
The hanger is available in black or brown.
858
-
Cavalry 1874 Dyer Cartridge Pouch
The M1874 Dyer cartridge pouch is used with the 45/70 rifle or carbine during the Indian Wars. It is made of high quality black leather with a US in oval embossed on the flap. The flap closure has a brass plate and finial. There are two belt loops on the back. It is lined with lambs wool. The pouch is available in black and Russet leather.
876
-
Belt Enlisted M1855 with Keeper
M1855 US issue belt with Brass Keeper installed. The brass keepers were commonly utilized on mid to late war M1855 Enlisted waist belts for Federals. They began to appear by early 1863 to replace the leather loop keeper that had been the standard prior to the war. The keeper has prongs to fasten to the leather waist belt. This belt fits all the one piece buckles and belt plates. Select Black or Russet leather color.
851
-
Belt & Snake Buckle
This quality economical 1 3/4 inch belt comes complete with a 2-piece snake cast brass buckle. A brass prong makes this belt adjustable up to a 50 inch waist. The belt is only available in black leather.
860
-
Indian War & 2-piece M1874 US Buckle
Quality economical Indian War 1 3/4 inch belt comes complete with a 2-piece US cast brass buckle. A brass hook makes this belt adjustable up to a 50 inch waist. The belt is only available in black leather.
863
-
CIVIL WAR US UNION NCO FIELD BELT & BUCKLE
CIVIL WAR US UNION NCO FIELD BELT & BUCKLE-FITSSIZE:(34-60 WAIST)MADE FROM HIGH QUALITY BLACK LEATHER890
-
Cavalry Saber Knot
Black leather strap with a braided leather tassel. One end fastens to the grip of the saber and the tasseled end slips over the wrist to prevent dropping the saber during combat. It measures 22 inches including the tassel.
864
-
Belt Saber or Sword Belt
This Saber or Sword Belt is made from high quality American leather and comes with the over the shoulder Sam Browne strap and all hangers. Snap swivels are NOT included and are available at an EXTRA CHARGE. 2 snap swivels are required.
This belt is made to fit any 2-Piece Buckle or Spoon & Wreath Buckle and NO STITCHING is required to affix the Buckle. Brass hook makes this belt adjustable for many sizes. The belt is available in Black or Russet leather.
856
-
Cavalry Carbine Cartridge Box
An economical cavalry carbine cartridge box features an inner flap covering a tool pouch. Wooden blocks for cartridges are included. The tab on the front flap is both sewn and riveted. There are 2 belt loops on the back. The box is sewn in white thread and is made of black leather and now in Russet.
Options: Black or Russet.
873
-
CIVIL WAR US CSA PISTOL BOX
It is sewn with white linen thread, has the brass finial, and has two belt loops on the back.883
-
.69 Caliber Confederate Cartridge Box
888
